LOCK-N-STITCH, Inc.
1015 S. Soderquist Rd.
Turlock CA 95380
Tel: 800-736-8261 • Fax: 209-632-1740
Email: info@locknstitch.com • Website: www.locknstitch.com
Casting Repair Products > Full-Torque Products > Drilling & Tapping Alignment Fixture > Drilling and Tapping Alignment Fixtures and Parts > View Items  

Drilling and Tapping Alignment Fixtures and Parts

 
Check up to five results to perform an action.

Alignment fixture is mounted to a Cadillac Northstar block to make sure the holes are drilled and tapped perpendicular to the deck surface and centered to the original hole. Over the fender repairs are possible but when doing all 20 holes most people choose to pull the engine from the car.

Using these alignment fixtures will assure the inserts will be installed perpendicular to the surface when using hand held drills and taps.



  Results 1 - 27 of 27 1 

Order #

Item Name

Size

Tap

Application
FT3TG-1 FT3 Tap Guide N/A FT3 Used by attaching to the FTDIP plate to tap holes for FT3 through FT6 size inserts.
FT422AP 27/64" Alignment Pin 27/64 ' FT3 Used in conjunction with the appropriate bushing to line up bracket for drilling.
FT4ABK Drilling and Tapping Alignment Fixtures and Parts N/A FT4 N/A
FT4CM4TG C4 Tap Guide N/A C4 Used by attaching to the FTDIP plate to tap holes for FT3 through FT6 size inserts.
FT4TG-1 FT4 Tap Guide N/A FT4 Used by attaching to the FTDIP plate to tap holes for FT3 through FT6 size inserts.
FT4TGX FT4 Tap Ext. Guide N/A FT4TX Used by attaching to the FTDIP plate to tap holes for FT3 through FT6 size inserts.
FT4TX Drilling and Tapping Alignment Fixtures and Parts N/A FT4 N/A
FT4TX-1 Drilling and Tapping Alignment Fixtures and Parts N/A FT4 N/A
FT500DXT Drilling and Tapping Alignment Fixtures and Parts N/A FT N/A
FT516AP 33/64" Alignment Pin 33/64 ' C4
FT4 		Used in conjunction with the appropriate bushing to line up bracket for drilling.
FT532DB Drilling and Tapping Alignment Fixtures and Parts N/A N/A N/A
FT532DB-EXT Drilling and Tapping Alignment Fixtures and Parts N/A N/A N/A
FT532DT Drilling and Tapping Alignment Fixtures and Parts N/A N/A N/A
FT532SDT Drilling and Tapping Alignment Fixtures and Parts N/A N/A N/A
FT5TG-1 FT5 Tap Guide N/A FT5 Used by attaching to the FTDIP plate to tap holes for FT3 through FT6 size inserts.
FT656AP 21/32" Alignment Pin 21/32 ' FT5 Used in conjunction with the appropriate bushing to line up bracket for drilling.
FT6ABK Drilling and Tapping Alignment Fixtures and Parts N/A N/A N/A
FT6TG-1 FT6 Tap Guide N/A FT6 Used by attaching to the FTDIP plate to tap holes for FT3 through FT6 size inserts.
FT797AP 51/64" Alignment Pin 51/64 ' FT6 Used in conjunction with the appropriate bushing to line up bracket for drilling.
FTDIP Right Angle Drill Plate N/A Size 3 to 6 Used for drilling and tapping perpendicular to the surface. This fixture works with FT3 through FT6 drill and tap bushings.
FTTID316 Drilling and Tapping Alignment Fixtures and Parts N/A N/A N/A
FTTID422 0.422" Drill Bushing 0.422 ' N/A Used by attaching to the FTDIP plate for drilling tap drill holes for FT3 through FT6 size inserts.
FTTID516 0.516" Drill Bushing 0.516 ' N/A Used by attaching to the FTDIP plate for drilling tap drill holes for FT3 through FT6 size inserts.
FTTID578 Drilling and Tapping Alignment Fixtures and Parts N/A N/A N/A
FTTID609 0.609" Drill Bushing 0.609 ' N/A Deep recess head bolt
FTTID656 0.656" Drill Bushing 0.656 ' N/A Used by attaching to the FTDIP plate for drilling tap drill holes for FT3 through FT6 size inserts.
FTTID797 0.797" Drill Bushing 0.797 ' N/A Used by attaching to the FTDIP plate for drilling tap drill holes for FT3 through FT6 size inserts.
  Results 1 - 27 of 27 1